Project 5: Noise Envelope and Sytrus

Here are a couple of cool tricks:


Start with the Sytrus synth in it's default preset and move the noise slider (in op.1 next to the sine wave all the way to the right) to maximum. Play a note on the keyboard and you'll hear static. This is what we want.

Now enter a dot in the step sequencer next to our noisy synth. Right click on the volume control (not the master, use the channel volume) and create an automation clip for volume. Draw a curve so that it fades in.

Now send the noisy sytrus to the mixer and put a filter on the channel- I like the fruity filter). Create another automation clip for the cutoff frequency.

Now you have a cool noise effect for your next project.

Once other trick I did in here was to create a pitch automation clip for one of the synths. This was pretty easy. Just right click the pitch control parameter of any channel, and draw a clip.

If you want more information, or a better explanation of this stuff, go to the site that taught me: http://fav.me/d192m6y

Have fun!